262: Difference between revisions

Revision as of 14:32, 23 January 2021

The Tektronix 262 is a programmer for the Tektronix 6R1 and 6R1A digital plug-ins for the 567 sampling oscilloscope or the 261 relay box, or the S-311, S-300, or S-301 plug-ins.

It connects via a cable to J34 on the 6R1 or 6R1A. Small printed circuit boards called program cards fit into slots in a bus inside the 262. Each of these cards specifies one measurement. These program cards are configurable by the user.

The 262 has slots for up to eight program cards. They are activated one at a time, either manually by pressing program selection switches on the front panel of the 262, or by having the 262 execute the measurements automatically in sequence, or the measurements can be activated remotely when the 262 is slaved to another 262.

The 262 was discontinued after 1971.

Front
Front Left
Fromt Left
Front Right
Top Internal
Top Internal
Program Card
Program Card
Program Card Relay
Program Card v2
Program Card v2
Logic Card
Logic Card
Synchronizer Card
Synchronizer Card
Regulator Card
Regulator Card
Counter Card
Counter Card
Comparator Card
Comparator Card
Right Front Cards
Power Supply
Left Rear Connector Wiring
Right Rear Connector Wiring
Rear Left
Rear Right
Rear
Program Switch Internal
Front view
Rear view
Inside view
programming card
programming card

@@ Line 13: / Line 13: @@
 * [http://bama.edebris.com/download/tek/262/Tek%20262.pdf Tektronix 262 Manual (PDF)]
-* [http://w140.com/tek_262_1968_catalog.pdf Tektronix 262 in 1968 Catalog (PDF)]
+* [https://w140.com/tek_262_1968_catalog.pdf Tektronix 262 in 1968 Catalog (PDF)]
 * [[Media:070-457.pdf|Tektronix BCD Limit Converters for the 262 (PDF, needs OCR)]]

262: Difference between revisions

Revision as of 14:32, 23 January 2021

Navigation menu