067-0587-10

Template:Plugin Sidebar 2 The Tektronix 067-0587-10 is a Calibration fixture / signal standardizer for 7000-series scopes. It has the same performance specifications as the 067-0587-02 but is modified for compatibility with the 7612D.

In the 067-0587-10, the signal coming from the PRETRIG OUT generates one trigger for each staircase signal when used with the TEST switch in the GAIN position. The 067-0587-02 generates a pre-trigger signal on the PRETRIG OUT connector while in any mode.

Key Specifications

	— GAIN mode —
Staircase accuracy	± 0.3% in ± 3 Div, ± 0.5% in ± 4 Div, Linearity ± 0.2% of 10 Div
	— STEP RESP mode —
Amplitude	2 to 10 Div
Position	Top at least ±5 Div from center of screen
Rise time	< 150 ps
Repetition rate	10 Hz to 1 MHz in decade steps, 0.1 %
Pretrig Out	0.5 V into 50 Ω, 55 to 95 ns lead time (internally variable)
	— FREQ RESP mode —
Input impedance	50 Ω
Input range	0.5 to 1 Vp-p
Flatness	± 3% from 3 MHz to 1 GHz

Pictures

• 
• 

  067-0587-10 left side (cam switch assembly on bottom left)

• 

  067-0587-10 right side − note extra switch and resistor in top middle area of PCB that differentiates it from 067-0587-02

• 

  067-0587-10 with modified rear plastic interface to fit 11000-series scopes