Interad 7121R: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
 
Line 10: Line 10:
* ''please add''  [[Category:Manual needed]]
* ''please add''  [[Category:Manual needed]]
}}
}}
The '''Interad 7121R''' is a VHF/UHF Spectrum Receiver made by [[Interad Ltd]] based on a modified [[5111|Tektronix 5111 storage scope]], with an application-specific plug-in. <br /><br />
The '''Interad 7121R''' is a VHF/UHF Spectrum Receiver made by [[Interad Ltd]] based on a modified [[5111|Tektronix 5111 storage scope]], with an application-specific plug-in.
 
This system was a Spectrum Surveillance system used by spooks to monitor and intercept RF emissions back in the good ol' Cold War days. The unit in question is early '70's vintage. You could sweep 1-1000 MHz and stare at the screen to see what was popping up, then narrow the span to "home in" in on the emitter, finally switching to a manual fixed tune mode and actually demodulate and listen to the offending signal to see if it was a "bug" or some other undesirable covert emitter.
This system was a Spectrum Surveillance system used by spooks to monitor and intercept RF emissions back in the good ol' Cold War days. The unit in question is early '70's vintage. You could sweep 1-1000 MHz and stare at the screen to see what was popping up, then narrow the span to "home in" in on the emitter, finally switching to a manual fixed tune mode and actually demodulate and listen to the offending signal to see if it was a "bug" or some other undesirable covert emitter.



Latest revision as of 14:52, 9 August 2021

Interad 7121R
VHF/UHF Spectrum Receiver
Interad Ltd 7121R

Produced from (?) to (?)

Manuals
  • please add
(All manuals in PDF format unless noted otherwise)
Manuals – Specifications – Links – Pictures

The Interad 7121R is a VHF/UHF Spectrum Receiver made by Interad Ltd based on a modified Tektronix 5111 storage scope, with an application-specific plug-in.

This system was a Spectrum Surveillance system used by spooks to monitor and intercept RF emissions back in the good ol' Cold War days. The unit in question is early '70's vintage. You could sweep 1-1000 MHz and stare at the screen to see what was popping up, then narrow the span to "home in" in on the emitter, finally switching to a manual fixed tune mode and actually demodulate and listen to the offending signal to see if it was a "bug" or some other undesirable covert emitter.

Key Specifications

  • please add

Prices

Please add

See Also

5000 Series plug-in interface
5103
5111 (5103/D11)
5113 (5103/D13)
5115 (5103/D15)

Pictures