SD-20: Difference between revisions
No edit summary |
No edit summary |
||
| Line 10: | Line 10: | ||
|designers= | |designers= | ||
|manuals= | |manuals= | ||
* [ | * [[Media:070-7531-02.pdf|Tektronix SD-20 User Manual]] (PDF) | ||
* [http://w140.com/72nd_ARFTG_Conference_CD.pdf Harper, Ridler, and Salter Paper Discussing TDR with SD-20 (PDF)] | * [http://w140.com/72nd_ARFTG_Conference_CD.pdf Harper, Ridler, and Salter Paper Discussing TDR with SD-20 (PDF)] | ||
}} | }} | ||
Revision as of 12:29, 13 August 2021
The Tektronix SD-20 Loopthrough Sampling Head is a single-channel, 20 GHz loop-through sampling head designed for low-loss testing in applications such as microwave systems research and development, digital device characterization and high-speed digital communications circuit design.
Like the older S-6, the SD-20 is non-terminated and routes the signal of interest directly through the sampling head without the need of a power divider, thus keeping losses to a minimum. The SD-20 can also be used for customized TDR measurements of transmission lines and controlled impedance devices. An external signal generator may be used, instead of the SD-24 step generator, to tailor the TDR stimulus to fit a particular situation. For instance, slower slew rates or higher amplitude may be utilized, or one may perform half-sine or impulse testing. In digital communications, the SD-20 is useful for viewing and triggering on the clock signal without the use of a power divider.
Key Specifications
| Rise time | 17.5 ps |
|---|---|
| Bandwidth | 20 GHz typ. |
| Noise | typically 750 µVRMS, 1.2 mVRMS max. (350 µV typ./550 µV max. with smoothing) |
| Max. input | 1.0 Vp-p signal, 1.6 Vp-p (AC+Offset) operating, ±3 V non-destructive |
| Sampling rate | 100 Hz - 200 kHz |
| Signal connections | 50 Ω 3.5 mm connectors |
