3A10: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
m (→top: clean up, replaced: title=Tektronix → manufacturer=Tektronix |series=560-series scopes |type=, {{Plugin Sidebar 2 → {{Plugin Sidebar, series=560-series scopes → designers=) |
||
| Line 1: | Line 1: | ||
{{Plugin Sidebar | {{Plugin Sidebar | | ||
manufacturer=Tektronix |series=560-series scopes |type= 3A10 | | |||
summary=Transducer Amplifier | | summary=Transducer Amplifier | | ||
image=Tek 3a10 front.jpg | | image=Tek 3a10 front.jpg | | ||
caption=Tektronix 3A10 front | | caption=Tektronix 3A10 front | | ||
designers= | | |||
introduced=1971 | | introduced=1971 | | ||
discontinued=1975 | | discontinued=1975 | | ||
| Line 12: | Line 12: | ||
The '''Tektronix 3A10''' is a differential amplifier plug-in for [[560-series scopes]]. | The '''Tektronix 3A10''' is a differential amplifier plug-in for [[560-series scopes]]. | ||
It is intended for use with transducers and for that purpose it has a DC-coupled differential input | It is intended for use with transducers and for that purpose it has a DC-coupled differential input and a variable voltage supply for powering the transducer. It also has a 6-pin input connector ([[Bendix connector|Bendix MS3101A-10-6S]]) to directly connect to the [[015-0169-00|015-0169-00 Strain Gage Adapter]]. | ||
and a variable voltage supply for powering the transducer. It also has a 6-pin input connector | |||
([[Bendix connector|Bendix MS3101A-10-6S]]) to directly connect to the [[015-0169-00|015-0169-00 Strain Gage Adapter]]. | |||
The 3A10 circuit is partially based on the [[1A7A]]'s. | The 3A10 circuit is partially based on the [[1A7A]]'s. | ||
Revision as of 11:25, 14 August 2021
The Tektronix 3A10 is a differential amplifier plug-in for 560-series scopes.
It is intended for use with transducers and for that purpose it has a DC-coupled differential input and a variable voltage supply for powering the transducer. It also has a 6-pin input connector (Bendix MS3101A-10-6S) to directly connect to the 015-0169-00 Strain Gage Adapter.
The 3A10 circuit is partially based on the 1A7A's.
Key Specifications
| Deflection | 10 μV/Div to 10 V/Div in 1–2–5 sequence |
|---|---|
| Input impedance | 1 MΩ // 47 pF (Volts mode) or 10 MΩ (transducer mode) |
| Bandwidth | 1 MHz, LF limit switchable DC, 0.1 Hz to 10 kHz in six steps, HF limit switchable 100 Hz to 1 MHz in ×3/×10 steps, AC coupling 1.6 Hz |
| Signal ranges |
| Range | Differential signal | DC Offset | Common mode |
|---|---|---|---|
| 10 μV/Div to 10 mV/Div | ±1 V | ±1 V | ±10 V |
| 20 mV/Div to 0.1 V/Div | ±10 V | ±10 V | ±100 V |
| 0.2 V/Div to 1 V/Div | ±100 V | ±100 V | ±500 V |
| 2 V/Div to 10 V/Div | ±1000 V | ±1000 V | ±500 V |
Pictures
-
-
-
-
-
top
-
right
-
left
-
front
-
bottom
-
front
