P5210: Difference between revisions

Revision as of 08:59, 21 January 2022

Tektronix P5210
50 MHz HV differential probe P5210 Compatible with Tekprobe BNC connector Produced from 1998 to (?) Manuals P5210 High Voltage Differential Probe Service Manual (PDF, no schematics)

The Tektronix P5210 is a 50 MHz high-voltage differential probe with a Tekprobe BNC connector.

Bandwidth	50 MHz (5 MHz limit switchable)
Attenuation	100:1 or 1000:1
Maximum input	5,600 V (DC + pk AC) between leads, 1 kV_RMS CAT III (2,2 kV_RMS CAT II ) from ground; derate above 1.5 MHz
CMRR	>3000:1 @ DC (500 V), >10,000:1 @ 60 Hz, >300:1 @ 100 kHz, >300:1 @ 1 MHz
Input impedance	16 MΩ // 3.5 pF between inputs; 8 MΩ // 7 pF between each input and ground
Delay	20 ns
Output	50 Ω output drives 1 MΩ // 15-20 pF scope input; scope bandwidth should be ≥200 MHz
Features	visible/audible overvoltage indicator

@@ Line 14: / Line 14: @@
 {{BeginSpecs}}
-{{Spec | Maximum Voltage | 5,600 V (DC + pk AC) between leads, 1 kV<sub>RMS</sub> CAT III (2,2 kV<sub>RMS</sub> CAT II ) from ground; derate above 1.5 MHz }}
+{{Spec | Bandwidth | 50 MHz (5 MHz limit switchable) }}
 {{Spec | Attenuation | 100:1 or 1000:1 }}
-{{Spec | Bandwidth | 50 MHz (5 MHz limit switchable) }}
+{{Spec | Maximum input | 5,600 V (DC + pk AC) between leads, 1 kV<sub>RMS</sub> CAT III (2,2 kV<sub>RMS</sub> CAT II ) from ground; derate above 1.5 MHz }}
-{{Spec | Common-Mode Rejection Ratio | >3000:1 @ DC (500 V), >10,000:1 @ 60 Hz, >300:1 @ 100 kHz, >300:1 @ 1 MHz }}
+{{Spec | CMRR | >3000:1 @ DC (500 V), >10,000:1 @ 60 Hz, >300:1 @ 100 kHz, >300:1 @ 1 MHz }}
 {{Spec | Input impedance | 16 MΩ // 3.5 pF between inputs; 8 MΩ // 7 pF between each input and ground }}
 {{Spec | Delay | 20 ns }}