Turret attenuators: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
Vintage dave (talk | contribs) (heat sensitivity) |
||
| Line 2: | Line 2: | ||
They were used in the [[H|Type H]], [[Z|Type Z]], [[516]], and [[1121]] and are known to give trouble in the form of intermittent electrical continuity at the contacts. | They were used in the [[H|Type H]], [[Z|Type Z]], [[516]], and [[1121]] and are known to give trouble in the form of intermittent electrical continuity at the contacts. | ||
Also, the plastic used in the turrets is easily melted if a soldering iron gets anywhere near it. | |||
<gallery> | <gallery> | ||
Latest revision as of 19:31, 27 March 2022
In a Turret attenuator, individual R/C attenuator elements are rotated within a cylindrical housing whereas the external contacts stay stationary.
They were used in the Type H, Type Z, 516, and 1121 and are known to give trouble in the form of intermittent electrical continuity at the contacts. Also, the plastic used in the turrets is easily melted if a soldering iron gets anywhere near it.
-
Turret attenuator of a 1121
-
-
Type Z attenuators circuits
