155-0078-10: Difference between revisions
Jump to navigation
Jump to search
(Removed redirect to 155-0078-00) Tag: Removed redirect |
No edit summary |
||
| Line 14: | Line 14: | ||
[155-0078] Suffixes -10, -11, -12 and -13 were used for the redesigned M84, known as the M705. | [155-0078] Suffixes -10, -11, -12 and -13 were used for the redesigned M84, known as the M705. | ||
The M705 was necessary because the original [[SH2]] (2-2.5 GHz?) process was being discontinued. | The M705 was necessary because the original [[SH2]] (2-2.5 GHz?) process was being discontinued. | ||
The M705 was designed by [[Hal | The M705 was designed by [[Hal Lillywhite]] using the faster [[SH3]] process (6-7 GHz). | ||
Additionally, the M705 apparently had the gain setting resistor laser trimmed at the wafer level. | Additionally, the M705 apparently had the gain setting resistor laser trimmed at the wafer level. | ||
Revision as of 03:01, 14 June 2023
The Tektronix M705 (P/N 155-0078-10,155-0078-11,155-0078-12,155-0078-13) is a broadband amplifier monolithic integrated circuit in a minipac package.
It is a reimplementation of the M(0)84 aka 155-0078-0x using the SH3 process.
According to John Addis,
[155-0078] Suffixes -10, -11, -12 and -13 were used for the redesigned M84, known as the M705. The M705 was necessary because the original SH2 (2-2.5 GHz?) process was being discontinued. The M705 was designed by Hal Lillywhite using the faster SH3 process (6-7 GHz).
Additionally, the M705 apparently had the gain setting resistor laser trimmed at the wafer level. The M705 was designed in late 1989 and tested in early 1990.
For other information, see 155-0078-00.