067-1436-00: Difference between revisions
Jump to navigation
Jump to search
Jaredcabot (talk | contribs) (small description corrections) |
No edit summary |
||
| Line 13: | Line 13: | ||
* [[Media:070-8760-02.pdf|Tektronix Communication Pod Instruction Manual 070-8760-02]] | * [[Media:070-8760-02.pdf|Tektronix Communication Pod Instruction Manual 070-8760-02]] | ||
}} | }} | ||
The 067-1436-00 Communications Pod was used between a PC and a TAS400, TDS300 or [[THS- | The '''Tektronix 067-1436-00 Communications Pod''' was used between a PC and a [[:Category:TAS series scopes|TAS400]], [[:Category:TDS300 series scopes|TDS300]], or [[THS-series oscilloscopes|THS700]] series oscilloscopes to download firmware to the instrument. It uses both a serial port and GPIB at the same time along with specific PC software. | ||
The ribbon cable connects directly to the CPU board on TAS400 and main board on TDS300 series scopes, while THS700 series scopes used an adapter cable to connect to the socket on its mainboard. | The ribbon cable connects directly to the CPU board on TAS400 and main board on TDS300 series scopes, while THS700 series scopes used an adapter cable to connect to the socket on its mainboard. | ||
Revision as of 05:14, 4 October 2023
The Tektronix 067-1436-00 Communications Pod was used between a PC and a TAS400, TDS300, or THS700 series oscilloscopes to download firmware to the instrument. It uses both a serial port and GPIB at the same time along with specific PC software.
The ribbon cable connects directly to the CPU board on TAS400 and main board on TDS300 series scopes, while THS700 series scopes used an adapter cable to connect to the socket on its mainboard.
The green RJ45 connector on top seen in the pictures is not original.
Software
Pictures
-
-
-
-
-
THS700 Adapter Cable
-
THS700 Adapter Cable
