067-1436-00: Difference between revisions
No edit summary |
Jaredcabot (talk | contribs) (Added software, firmware, photos and additional info.) |
||
| Line 16: | Line 16: | ||
The ribbon cable connects directly to the CPU board on TAS400 and main board on TDS300 series scopes, while THS700 series scopes used an adapter cable to connect to the socket on its mainboard. | The ribbon cable connects directly to the CPU board on TAS400 and main board on TDS300 series scopes, while THS700 series scopes used an adapter cable to connect to the socket on its mainboard. | ||
The Pod uses a Motorola M68332BCCDI development board which contains a M68HC11 MCU and RS-232C serial communications, which is mounted on a Tek designed mainboard. | |||
The green RJ45 connector on top seen in the pictures is not original. | The green RJ45 connector on top seen in the pictures is not original. | ||
==Software== | ==Software== | ||
* [[Media:063-1852-03.zip|ROMBURN Software 063-1852-03 ( | * [[Media:063-1852-03.zip|ROMBURN v5.4 Software 063-1852-03]] (ZIP) | ||
==Scope Firmware== | |||
* [[Media:RomBurn_TDS300_Firmwares.zip|TDS300 Firmwares]] (ZIP) | |||
* [[Media:RomBurn_THS700_Firmwares.zip|THS700 Firmwares]] (ZIP) | |||
==Pictures== | ==Pictures== | ||
| Line 27: | Line 33: | ||
067-1436-0x_2.jpg | 067-1436-0x_2.jpg | ||
067-1436-0x_3.jpg | 067-1436-0x_3.jpg | ||
067-1436- | 067-1436-0x_4.jpg | ||
067-1436-0x_5.jpg|067-1436-00 Internal | |||
067-1436-0x_6.jpg|067-1436-00 Mainboard underside | |||
067-1436-0x_7.jpg|067-1436-00 Daughter Board Top | |||
067-1436-0x_8.jpg|067-1436-00 Daughter Board Bottom | |||
067-1436-0x_THS700_AdapterCable_1.jpg|THS700 Adapter Cable | 067-1436-0x_THS700_AdapterCable_1.jpg|THS700 Adapter Cable | ||
067-1436-0x_THS700_AdapterCable_2.jpg|THS700 Adapter Cable | 067-1436-0x_THS700_AdapterCable_2.jpg|THS700 Adapter Cable | ||
Revision as of 02:04, 5 October 2023
The Tektronix 067-1436-00 Communications Pod was used between a PC and a TAS400, TDS300, or THS700 series oscilloscopes to download firmware to the instrument. It uses both a serial port and GPIB at the same time along with specific PC software.
The ribbon cable connects directly to the CPU board on TAS400 and main board on TDS300 series scopes, while THS700 series scopes used an adapter cable to connect to the socket on its mainboard.
The Pod uses a Motorola M68332BCCDI development board which contains a M68HC11 MCU and RS-232C serial communications, which is mounted on a Tek designed mainboard.
The green RJ45 connector on top seen in the pictures is not original.
Software
Scope Firmware
- TDS300 Firmwares (ZIP)
- THS700 Firmwares (ZIP)
Pictures
-
-
-
-
-
067-1436-00 Internal
-
067-1436-00 Mainboard underside
-
067-1436-00 Daughter Board Top
-
067-1436-00 Daughter Board Bottom
-
THS700 Adapter Cable
-
THS700 Adapter Cable
