PM403

Manuals – Specifications – Links – Pictures

The PM 403 personality module is a disassembly probe for the MOS Technology 6502 microprocessor. It can be used with the 1230, 1225 and 1220 logic analyzers.

Note from operators manual:

DISASSEMBLY DISPLAY

Microprocessor disassembly is an option for the analyzer. When you power up with an optional microprocessor probe connected, the analyzer asks if you want to use the setup for the microprocessor probe. If you want to use the micropro-cessor probe's setup, press ENTER to load it. Otherwise, press MENU to preserve the current analyzer setup and access the normal analyzer menus. Disassembly information is discussed in the operator's manual for each microprocessor disassembly probe.

ROM image

• PM403 U12

See also

• All Tektronix ROM images

Key Specifications

• please add

Pictures

Note that the ribbon cables are connected to the board via transition connectors (i.e. not an IDC socket mated with header pins) and thus could not be removed for these photos without desoldering/disassembly. This was done to keep the PCB assembly's profile low so it would fit into the PacTec case.

• 
• 
• 
•