P410

From TekWiki
Revision as of 14:10, 7 February 2023 by Kurt (talk | contribs)
Jump to navigation Jump to search
Tektronix P410
10× passive probe
P400 series catalog excerpt from 1957

Compatible with 1 MΩ scope inputs

Produced from 1955 to (?)

Manuals
  • please add


Manuals – Specifications – Links – Pictures

The Tektronix P410 is a 10× passive voltage probe. Maximum voltage is 600 V peak-to-peak. It connects to the scope with a UHF connector.

The "P400 Series" (not to be confused with the modern P400 probe) also includes P405 (5x), P420 (20x), P450 (50x), P450-L (50x extra low capacitance), and P4100 (100x).

These probes were introduced in 1955 along with the Type 541 and Type 545 scopes because at 30 MHz, the P510A's 50 Ω coax cable exhibited unacceptable ringing due to the impedance mismatch at the scope's 1 MΩ input.

The P400 uses a special cable with a very thin, high-resistance center conductor which creates a better impedance match. All subsequent high-impedance probes use this kind of cable.

Links

Pictures

  • please add