2246

Revision as of 12:31, 9 April 2022 by Peter (talk | contribs)

The Tektronix 2246 is a 100 MHz four-channel analog oscilloscope. Channels 1-2 are fully-functional, whereas 3-4 are limited in both deflection factor and coupling, as they are intended mainly for digital and trigger signals.

Tektronix 2246
100 MHz portable 4-channel scope
Tektronix 2246

Produced from 1987 to 1995

Manuals

The 2246 includes many of the same features of the 2245A and adds auto-tracking SmartCursors which track the selected measurement, trigger level, or ground. There are Labeled Volts Cursors with Ground-Referenced Readings and On-Screen Readouts; Hands-Off Voltmeter Measurements of DC Volts, +Peak and -Peak Volts, and P-P Volts; SmartCursors Integrate Voltage, Time, Frequency, and Phase Measurements, and are available in ALT and B Horizontal Modes.

Key Specifications

Bandwidth 100 MHz
Deflection CH 1, CH 2: 2 mV/div to 5 V/div (1–2–5); CH 3, CH 4: 0.1 V/div and 0.5 V/div, all ±2%; BW Limit: 20 MHz ±15%
Vertical Operating Modes CH1,2,3,4, CH2 Invert, Add, Alt, Chop (625 kHz)
Input Impedance 1 MΩ ±1.0% // 20 pF ±1 pF
Maximum Input Voltage 400 V (DC + peak AC) or 800 V (p-p ac at ≤ 10 kHz)
Sweep Speeds A Time Base: 0.5 s/div to 20 ns/div (1–2–5); B Time Base: 5 ms/div to 20 ns/div (1–2–5, ×10 magnifier to 2 ns/div)
Trigger DC, Noise Reject, HF Reject, LF Reject, AC, TV Line, TV Field
Trigger Modes A Mode: Auto Level, Auto, Norm, TV Line, TV Field, Single Seq. B Mode: Runs After Delay, Auto Level, Norm, TV Line (From A Source)
Trigger Source A & B Vert, CH1, 2, 3, 4, Line
Voltmeter DC, +Peak, −Peak, PK-PK, Gated Volts, Smart Tracking Cursors: Volts, GND, Trigger Lvl
Cursors Time, 1/Time, Delta Time, 1/Delta Time, Delta Phase, Volts
Interface Ext Counter/Timer Base Input connector; Ext Z-Axis Input connector
Probes Two P6109 100 MHz ×10 probes, BNC connector with a readout pin
Power 90 − 250 VAC, 48 − 445 Hz, 100 W max.

Models

  • 2246
  • 2246 1Y
  • 2246 2R
  • 2246 Mod A
  • 2246A

See Also

Pictures


CRTs used in the 2246

Page Part nos Description Designers Used in
T4656 154-0905-00 CRT 2245A 2246 2246A 2247A

Custom ICs used in the 2246

Page Model Part nos Description Designers Used in
155-0322-00 M429 155-0322-00 vertical output amplifier 2245A 2246
156-2654-00 156-2654-00 156-2654-00 ECL "fast logic" 2245A 2246
156-2655-00 156-2655-00 156-2655-00 "slow logic" 2245A 2246
165-2154-00 165-2154-00 165-2154-00 buffer amplifier 2246
234-0203-20 M376-003 234-0133-20 234-0203-20 234-0238-20 amplifier 2245A 2246
234-0401-20 234-0401-20 234-0401-20 234-0401-21 horizontal preamplifier 2245A 2246
M376-004 M376-004 234-0204-20 234-0239-30 234-0239-31 trigger 2245A 2246