7D14

From TekWiki
Revision as of 10:04, 24 June 2014 by Peter (talk | contribs) (basic specs)
Jump to navigation Jump to search
{{{manufacturer}}} Special Function
525 MHz frequency counter
7D14 front view (manual)

Compatible with [[7000-series scopes]]

Produced from {{{introduced}}} to {{{discontinued}}}

Manuals
(All manuals in PDF format unless noted otherwise)
[[Category:Introduced in {{{introduced}}}]]
Manuals – Specifications – Links – Pictures


The Tektronix 7D14 is a 525 MHz frequency counter plug-in for 7000 series mainframes.

It uses the mainframe's readout system to display an eight-digit count on the CRT. Modes include frequency, frequency ratio and events count using manual or external gate.

When installed in a horizontal compartment, it can count the trigger pickoff from a vertical amplifier unit. This allows simultaneous viewing and counting of a signal in four-bay mainframes.

In a vertical compartment, the trigger signal (i.e. the "shaped" input) can be displayed as the module's Y output.

Specifications

Key Specifications

Frequency 525 MHz (5 MHz bandwidth limiting switch available)
Sensitivity 100 mV to 10 V
Input Impedance 50 Ω or 1 MΩ // 20 pF on external input, 1.5 Div internal when set to "Trig Source"
Gate time 1 ms to 10 s
Display time 0.1 s to 5 s or infinite
Features
  • Gate monitor output / Ext Gate input (BSM)
  • 1 MHz reference monitor output / Ext Ref input (BSM)

Links

Pictures

please add