7000-series remote control connector

The remote control connector on the rear of the 7904 scope is an Amphenol 165-16 socket.

Pin	Function	Notes
A	Single sweep reset	Close to ground within 0.5V, 10mA max, minimum 10 μs pulse width
B	Ground
C	A Remote ready	+5 V via 47 Ω when active, can drive #49 bulb
D	B Remote ready	+5 V via 47 Ω when active, can drive #49 bulb
E	Remote readout lock-out	Close to ground within 0.1V, 2mA max, 2V open voltage
F	Remote single-shot lock-out	Closure to ground within 0.4V, pin E was grounded before, rate of change ≥ 0.1V/μs, 3mA max, 10V open voltage
H	n/c
J	n/c
K	n/c