SG504
The Tektronix SG504 is a levelled sinewave generator plug-in for the TM500 system.
Key Specifications
| Frequency range | 50 kHz or 6 MHz (Ref), 245 MHz to 550 MHz (Lo), 495 MHz to 1050 MHz (Hi) |
|---|---|
| Output amplitude | 0.5 Vp-p to at least 4 Vp-p, flat to within ±4% |
| Monitor output | 0.3 Vp-p into 50 Ω |
| FM input | ±9 V into 50 kΩ (DC to 100 kHz) produces ±0.05% to ±0.4% deviation depending on frequency |
Output Head
The SG504 is usually found on Ebay without the output head (015-0282-00). David Partridge did an excellent teardown and reverse engineering of the output head and sells kits to make new heads.
It's fairly easy to use that schematic to make a new level head that fits in a standard BNC Pomona box since its function is really just a 250 MHz to 1050 MHz temperature compensated power meter with 50 Ω feed-thru. See the pictures for an example.
As of April 2016, Ebay seller "ancelb" is selling SG504 leveling (output) heads that are specified to perform much better than the original Tektronix heads. See photo below.
There is an open source project to replace the output head at hackaday.io.
Videos
SG504 Repair and Frustration from a stubborn unit by Zenwizard Studios @ YouTube
Prices
1979: $2,295 (~$9,000 in 2022 Dollars)
According to an internal memo, in 1979 annual sales were estimated at 350 units.
Pictures
-
-
-
-
With output head (catalog picture)
-
Home-made output head
-
Late Revision Front Panel with LED Frequency Readout
-
SG504 head being produced and sold on Ebay by seller "ancelb"
-
SG504 in TM515 with other TM500 gear
-
Output head
-
Output head
-
Output head
-
Output head
-
Output head
-
Output head
-
Output head
-
Output head
-
Service Note Fig.1
