570

Manuals – Specifications – Links – Pictures

The Tektronix 570 is a curve tracer for tubes, introduced in 1955. It sweeps the plate voltage between zero and a selectable maximum voltage while "stepping" the control grid through a set of voltages.

A selectable screen voltage is available for testing tubes with screens. The plate voltage is measured and applied to the X-axis of the display. Plate current is measured and amplified and is applied to the Y-axis of the display.

Key Specifications

• please add

Internals

The 570 contains five transformers:

• T310: center-tapped isolation transformer for plate sweep
• T340: multitap transformer for heater voltages
• T401: multitap autotransformer for selecting peak plate voltage, feeds T310
• T501: transformer for floating supplies and screen voltage supply
• T620: transformer for 60 kHz HV power oscillator for CRT voltages

The screen supply is regulated and uses a 6CD6GA tube as the series regulator.

The vertical and horizontal amplifiers are almost identical. The first stage is a differential amplifier made of two 6AU6 tubes. The second stage is a differential amplifier made of both halves of a 6BQ7A.

Pictures

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

Adaptors

• 

  12-pin adaptor

• 

  12-pin adaptor

• 

  7-pin miniature adaptor

• 

  7-pin miniature adaptor