7B80
The Tektronix 7B80 is a 400 MHz single time base plug-in without delay function for 7000-series scopes, typically the 7800 Series, e.g. 7844. It uses the 155-0126-00 trigger amplifier followed by the 155-0109-01 trigger detector.
Option 2 adds support for X-Y mode via a "Display mode" switch (pictured). When X-Y mode is selected, the X-axis signal is taken from the internal trigger path.
The companion delaying timebase for use in 4-slot mainframes is the 7B85.
The 7B80 uses the ±50 V supplies from the mainframe.
Key Specifications
| Sweep | 10 ns/Div to 5 s/Div (1-2-5), ×10 magnifier (down to 1 ns/Div), variable sweep (up to ×2.5) and holdoff (up to ×2 sweep lengths at 20 ms/Div and faster) |
|---|---|
| Excluded sweep | First 10 ns in 78xx, 79xx; First 20 ns in 77xx; First 50 ns in other mainframes |
| Trigger | 50 mV or 0.3 Div up to 50 MHz, 250 mV or 1.5 Div up to 400 MHz; AC >30 Hz, LF REJ >30 kHz, HF REJ <50 kHz |
| Jitter | <100 ps at 400 MHz |
| Ext. Trigger | Max. 250 V DC+peak AC, 1 MΩ // 20 pF |
| Sweep/Trigger Modes | Peak-Peak Auto, Auto, Norm, Single Sweep |
Pictures
-
Front
-
7B80 Opt.2, left side
-
7B80 Opt.2, left side, X-Y switch board removed
-
7B80 Opt.2, X-Y switch board, top
-
7B80 Opt.2, X-Y switch board, bottom
-
7B80, right side
-
Right front
-
Right rear
-
Left front
-
Left rear
-
Top
-
Rear
