7912

Revision as of 04:52, 30 June 2015 by Peter (talk | contribs)


The Tektronix 7912 is a high-speed digitizer that takes one 7000-series vertical plug-in and one 7000-series horizontal plug-in. There is a 7912AD which has 500 MHz bandwidth and a 7912HB which offers 750 MHz bandwidth.

{{{manufacturer}}} 
500/750 MHz Digitizer
Tektronix 7912AD with 7A26 and 7B90P

Produced from (?) to (?)

Manuals
(All manuals in PDF format unless noted otherwise)

These instruments contain a special internal CRT-based digitizing scan converter tube (T7912) that is not visible from the outside. The signal goes from the vertical plug-in to the vertical amplifier to the digitizing tube where it deflects a beam of electrons. The electrons hit a small flat rectangular target inside the tube. This target is a solid state image sensor, conceptually similar to that in a digital camera.

The trace is read from the target by electronics in the 7912AD, digitized, and stored in memory. The reading of the target is asynchronous from the sweep and therefore the tube can be considered a form of scan converter. Three output methods are provided: NTSC-out, X-Y low-speed analog, and a GPIB interface.

The resolution of the target is 512x512, giving 512 points in the time domain and 9-bit linear quantization of the input voltage. Bypassing the vertical amplifier, the 7912 can provide a bandwidth of 1 GHz with a sensitivity of 4 V/Div.

With aftermarket modifications to the electronics, 7912AD bandwidths have been extended above 2 GHz in special cases. With a 7B92 sweeping the whole X-axis in 5 ns, and the 7912AD capturing 512 samples in that sweep, the 7912AD performs the function of a 100 GSample/s ADC.

The technology was designed at Tektronix in the 1970's and sold through the 1980's. They were expensive.

The WP 2000 (067-0679-00) Digital Display Controller is an external module that interfaces with the 7912.

Plug-in modules intended for the 7912 have a 'P' suffix, meaning Programmable, e.g. 7A16P, 7A29P and 7B90P.

Specifications

The Tektronix 7912AD is 19" wide, 7" tall, 27" deep, and weighs 55 pounds. It uses 360 watts maximum.

Manuals

Links

See Also

Pictures