2230

The Tektronix 2230 is a portable 100 MHz, dual-channel combination analog / digital storage scope, sister model of 2220 and 2221.

{{{manufacturer}}}
100 MHz portable DSO please add image Produced from 1986 to 1989 Manuals 2230 Operator (OCR PDF, 8M) (May 1988 version) 2230 Service (OCR PDF, 36M) (low quality scan) 2230/2221/2220 Description (OCR PDF) Modifications 040-1344-00 CRT Noise Reduction (1991) (All manuals in PDF format unless noted otherwise)

Manuals – Specifications – Links – Pictures

It has both an analog mode and a digital mode. In the digital storage mode, up to three waveform sets (CH 1 and/or CH 2) may be stored in a save ref. memory and recalled for display at a later time.

The 2230 features alphanumeric CRT readout of many of the front panel controls. It has a DB-9 auxiliary connector on the right side providing an external clock input as well as an output for an analog X-Y plotter to make permanent copies of the display. This feature can be accessed through the "Mem select" menu.

Some Firmware versions have a diagnostics menu with the Tektronix logo and wizard image.

The Cursor knob is prone to failure. It becomes jittery and will not scroll properly.

Key Specifications

Bandwidth	100 MHz (analog)
Sampling rate	20 MS/s
Record length	1K or 4K samples (single channel), optional 26K
Features	Pre/Post-triggering Averaging Dual time base Cursors and readout GPIB option

please add

Links

Pictures

2230A Signal Input Board

2230A Signal Input Board
2230 interface board
upper most board