Telequipment D755

The Telequipment D755 opt 66 is a 50 MHz scope. It is a government version of the Telequipment D75 with the addition of an XY-mode.

{{{manufacturer}}}
50 MHz scope Telequipment D755 with V4 and S2C plug-ins Produced from (?) to (?) Manuals Please add (All manuals in PDF format unless noted otherwise)

The D755 takes two plug-ins that are also compatible with D83, D75, D63 and DM63. Vertical plugins include the V4 dual trace amplifiers, the V3 single channel differential amplifier, the V1 single channel amplifier, and the V5 single channel amplifier with delay line. Timebase plugins include the S1 single timebase and S2C dual timebase. The preinstalled plugins in the D755 are the V4 dual trace amplifiers and the S2C dual timebase. Calibration fixtures include the 067-0672-00 plug-in for the vertical slot and the 067-0673-00 plug-in for the horizontal slot.

Key Specifications

}

Bandwidth	DC Coupled DC to 50 MHz (-3 dB) and AC Coupled 2 Hz to 50 MHz (-3 dB)
Deflection Factors	5 mV/div to 20 V/div in 12 calibrated steps (1-2-5 sequence)
Timebase A	2 s/div to 100 ns/div in 23 calibrated steps (1-2-5 sequence)
Timebase B	1 s/div to 100 ns/div in 22 calibrated steps (1-2-5 sequence)
Trigger Modes Timebase A	Auto, DC, AC, HF Reject
Trigger Modes Timebase B	Auto, AC
Trigger Sources	CH1, CH2, Alternate
Input Voltage	max. 400 V DC + AC peak
Rise time	7 ns
Input Impedance	1 MO // 29 pF
Operating Modes	CH1, CH2, CH1/CH2 Alt, Chopped, CH1 and CH2 added, CH2 inverted , XY-mode
Sweep Modes	A only, A intensified by B, B delayed by A, A and B mixed, delayed B variable or triggered, repetitive or single shot
Delay Time	10 µs to 20 s
Calibrator	~1 kHz, 30 mV and 300 mV, 3 mA, square wave, ±1% voltage and current, ±20% frequency
CRT	154-0676-10 tube, P31 phosphor, 15 kV acceleration, 8 cm × 10 cm graticule
Mains Voltage	100 V - 125 V in 5V steps, 200 V - 250 V in 10 V steps, selected via primary voltage selector, 40 Hz to 400 Hz
Power Consumption	85 VA
Dimensions and Weight	Height: 136 mm, Width: 380 mm, Depth: 470 mm, Weight: 11.4 kg
Temperature limits	Operating: -5°C to +40°C, Non-operating: -25°C to +70°C

According to this posting, the CRT is a 154-0676-10 Tektronix CRT, the same as in the 465.