5116

The Tektronix 5116 is a single beam 2 MHz mainframe that has a two-colour LCD shutter in front of a CRT with P4 (white) phosphor.

Tektronix 5116
Color-display scope mainframe Tektronix 5116 Produced from 1984 to 1987 Manuals Tektronix 5116 Manual (PDF) Tektronix 5116 and 5D10 Specs (PDF) Tektronix 5116 Brochure Radio Electronics Article on Tek 5116 (PDF) (All manuals in PDF format unless noted otherwise)

Manuals – Specifications – Links – Pictures

The color shutter works only with the 5D10 digitizer plug-in. The 5116 manual says "The 5116 will not produce color signals if the 5D10 Waveform Digitizer does not have a serial number of B020100 or greater."

The shutter consists of one red and one green polarizer/LCD combinations the size of the visible screen. The 5D10 in turn enables the red shutter, draws the red parts of display, turns on the green shutter in addition, draws the yellow (red+green) parts of the display, then turns off the red shutter, and draws the green parts of the display, at a rate of about 20 Hz. The slow multiplexing rate can lead to color artifacts becoming visible when the observer moves.

In contrast with what is mentioned sometimes, the 5116 does not provide alphanumeric readout. The 5D10 takes care of this.