067-0532-01

Revision as of 03:52, 12 June 2024 by Peter (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

The Tektronix Type 067-0532-01 Calibration Fixture is a constant amplitude signal generator whose output is a low-distortion sinewave.

Tektronix 067-0532-01
500 MHz Constant-Amplitude Signal Generator
Tektronix 067-0532-01 Constant Amplitude Signal Generator

Produced from 1971 to (?)

Manuals
(All manuals in PDF format unless noted otherwise)

It is intended to provide a signal of known frequency and amplitude for measuring oscilloscope bandwidth.

A 3 MHz sinewave is available as a reference amplitude from which a –3 dB measurement can be made. The output connector, amplitude detector, and 50 Ω source resistor are situated at the end of a 42 inch cable. Output amplitude is regulated at the end of the cable adjacent to the GR-874 output connector, thus essentially eliminating cable loss and standing-wave errors.

Key Specifications

Frequency range 65 MHz to 500 MHz
Frequency accuracy ±2% of indicated frequency; 3 MHz output ±5%
Amplitude range 0.5 Vp-p to 4 Vp-p into 50 Ω in 0.5 Vp-p increments; variable between calibrated steps; max. output 4.2 Vp-p
Amplitude accuracy 3 MHz ±2%, 65−300 MHz ±2%, 300−500 MHz ±5%
Output 50 Ω ±1%, via GR-874 connector

Pictures