WR501: Difference between revisions

146 bytes added ,  16 June 2014
+cat
(info about delay lines usually missing on the WR501)
(+cat)
Line 1: Line 1:
The WR 501 is a 16-channel word recognizer with delay, packaged in a TM 500 plug-in.  The WR 501 can
The '''Tektronix WR 501''' is a 16-channel word recognizer with delay, packaged in a TM 500 plug-in.  The WR 501 can provide a trigger signal for an oscilloscope or provide a trigger signal and data acquisition for the LA 501 Logic Analyzer.
provide a trigger signal for an oscilloscope or provide a trigger signal and data acquisition for  
the LA 501 Logic Analyzer.


Note that DL15 and DL115, the 24 pin delay lines that fit in the sockets on each board are
Note that DL15 and DL115, the 24 pin delay lines that fit in the sockets on each board are
Line 8: Line 6:
on the A2 main board.  They are unnecessary if you are using the WR501 to trigger a scope.
on the A2 main board.  They are unnecessary if you are using the WR501 to trigger a scope.


These ECL delay lines, pn 119-0775-00, 10 nS, 100 Ohm, can be found in the 7D01 logic analyzer plugin
These ECL delay lines, pn 119-0775-00, 10 ns, 100 Ω, can be found in the [[7D01]] logic analyzer plugin
for the 7000 series scopes.
for the [[7000-series scopes]].
 
==Pictures==


<gallery>
<gallery>
Line 18: Line 18:
Image:wr501_connector.jpg
Image:wr501_connector.jpg
</gallery>
</gallery>
[[Category:TM500 digital function plugins]]
[[Category:Manual needed]]
[[Category:Specifications needed]]