067-0532-01: Difference between revisions

[[File:067-0532-01 front.JPG|400px|thumb|right]]

The Tektronix '''Type 067-0532-01 Calibration Fixture''' is a '''Constant Amplitude Signal Generator''' whose output is a low-distortion sinewave.  It is intended to provide a signal of known frequency and amplitude for measuring oscilloscope bandwidth.  A 3Mhz sinewave is available as a reference amplitude from which a -3dB measurement can be made.  The output connector, amplitude detector, and 50 ohm source resistor are at the end of a 42 inch cable.  The amplitude is regulated at the end of the cable adjacent to the output connector.  Cable loss and standing-wave errors are essentially eliminated.   

 

{{Spec | Frequency|}}

{{Spec | Range | 65Mhz to 500Mhz}}

{{Spec | 3Mhz Frequency Accuracy | Within 5%)}}

 

{{Spec | Amplitude|}}

{{Spec | Range | 0.5V P-P to 4V P-P into 50Ω in .5V increments}}

{{Spec | Variable | Continuously Variable between calibrated steps. Max Output 4.2V}}

{{Spec | 3Mhz Amplitude Accuracy | Within 2% of indicated amplitude}}

{{Spec | Constant Amplitude Accuracy|}}

{{Spec | 65Mhz to 300Mhz | Within 2% of indicated amplitude}}

{{Spec | 300Mhz to 500Mhz| Within 5% of indicated amplitude}}

{{Spec | Output Source Impedance | 50Ω within 1%}}