39,717
edits
7D01/Repairs: Difference between revisions
no edit summary
No edit summary |
No edit summary |
||
| (5 intermediate revisions by the same user not shown) | |||
| Line 7: | Line 7: | ||
==Bad ROMs== | ==Bad ROMs== | ||
[[File:Tek DF1 ROM_piggyback.jpg|thumb|300px|right|Piggyback ROM board | [[File:Tek DF1 ROM_piggyback PCB.jpg|thumb|300px|right|Piggyback ROM board in place (click to enlarge)]] | ||
Old mask ROM chips frequently fail, e.g. due to electromigration problems. Unfortunately, the DF1 CPU board uses 2k×8 ROMs with pre-JEDEC pinouts (see [[Mostek MK31000]]) so there are no easy in-socket replacements. The expansion ROM in the DF2 should be compatible with a 2516 EPROM. | Old mask ROM chips frequently fail, e.g. due to electromigration problems. Unfortunately, the DF1 CPU board uses 2k×8 ROMs with pre-JEDEC pinouts (see [[Mostek MK31000]]) so there are no easy in-socket replacements. The expansion ROM in the DF2 should be compatible with a 2516 EPROM. | ||
However, there are pin headers P207, P208, P209 and P210 next to the CPU, originally used to connect the memory daughterboard or a test system, that make it easy to add a small custom piggyback board with a decoder and a more modern E(E)PROM. An 8k×8 chip (2764, 2864) is sufficient to hold the 6kB needed for the DF2. As a bonus, this upgrades a DF1 to a DF2 if the missing front panel key is added as well (pads are present on the PCB). The stock ROM chips | However, there are pin headers P207, P208, P209 and P210 next to the CPU, originally used to connect the memory daughterboard or a test system, that make it easy to add a small custom piggyback board with a decoder and a more modern E(E)PROM. An 8k×8 chip (2764, 2864) is sufficient to hold the 6kB needed for the DF2. As a bonus, this upgrades a DF1 to a DF2 if the missing front panel key is added as well (pads are present on the PCB). The stock ROM chips must be removed prior to installing the piggyback board. | ||
<gallery> | |||
Tek DF1 DF2 ROM replacement board schematic.png | ROM piggyback board schematic (click to enlarge) | |||
Tek DF1 ROM_piggyback.jpg | Prototype | |||
Tek DF1 ROM_piggyback PCB.jpg | Production PCB | |||
</gallery> | |||
==Links== | |||
* [[Media:Tek DF1 ROM piggyback PCB.zip| ZIP file with EPROM image, Eagle BRD and SCH files for the ROM replacement board]] designed by [[User:Peter|Peter]] | |||
[[Category:Instrument repair reports]] | [[Category:Instrument repair reports]] | ||