2230: Difference between revisions

188 bytes removed ,  10 April 2022
no edit summary
No edit summary
No edit summary
Line 56: Line 56:
{{Spec | Sampling rate | 20 MS/s }}
{{Spec | Sampling rate | 20 MS/s }}
{{Spec | Record length | 1K or 4K samples (single channel), optional 26K }}
{{Spec | Record length | 1K or 4K samples (single channel), optional 26K }}
{{Spec | Z axis | input (intensity); DC to 20 MHz, maximum safe input 30V (dc + peak ac) Input resistance about 10kΩ}}
{{Spec | Z axis | input (intensity); DC to 20 MHz, maximum safe input 30 V (DC + peak AC) Input resistance about 10 kΩ}}
{{Spec | CRT | [[154-0861-00]]; display area : 8 × 10 cm² }}
{{Spec | CRT | [[154-0861-00]]; display area : 8 × 10 cm² }}
{{Spec | Dimensions | With feet and handle: 137 x 361 x 511 mm³ }}
{{Spec | Dimensions | With feet and handle: 137 x 361 x 511 mm³ }}
Line 76: Line 76:
==Internals==
==Internals==
The 2230 is controlled by an [[Intel 8088]] microprocessor with firmware in a pair of 27512 EPROMs, and six TMS4426 16K×4 DRAMs.   
The 2230 is controlled by an [[Intel 8088]] microprocessor with firmware in a pair of 27512 EPROMs, and six TMS4426 16K×4 DRAMs.   
The A/D converter is a Sony CX20052A (8 bit, 20 MHz, ECL output).  A pair of MCM2016H 2K×8, 70 ns RAMs serve as acquisition memory.
The A/D converter is a [[156-2248-00|Sony CX20052A]] (8 bit, 20 MHz, ECL output).  A pair of MCM2016H 2K×8, 70 ns RAMs serve as acquisition memory.
 
Custom Tek chips used include [[155-0274-00]] (A1U130, A1U180), [[155-0273-00]] (A2U30, A2U80), and [[155-0022-00]] (A10U2101). 
There is also a semi-custom part (A10U9208 Display Controller, 156-2452-00).


==Pictures==
==Pictures==