DF1: Difference between revisions

39 bytes added ,  10 March 2023
no edit summary
mNo edit summary
No edit summary
Line 54: Line 54:
An internal jumper allows the user to select the source of the on-screen readout in timing diagram mode, which can be either the mainframe readout supplied by the 7D01, or superimposed by the DF1/DF2.  The latter is the standard setting and allows the DF1/DF2+7D01 combination to be used in mainframes without readout, e.g. the large-screen [[7603N]].
An internal jumper allows the user to select the source of the on-screen readout in timing diagram mode, which can be either the mainframe readout supplied by the 7D01, or superimposed by the DF1/DF2.  The latter is the standard setting and allows the DF1/DF2+7D01 combination to be used in mainframes without readout, e.g. the large-screen [[7603N]].


The DF1/DF2 has no direct connection to the scope mainframe, it attaches to the 7D01 through a 50-pin [[D-sub connector]] on the right side panel only.  The DF1/DF2 and 7D01 are mechanically coupled by three nylon standoffs that slide into cutouts in the 7D01's case rails. The bottom two standoffs are fixed and are inserted first, then the connector is plugged in and the third, sliding, stand-off at the top is moved to its locked position.
The DF1/DF2 has no direct connection to the scope mainframe it attaches to the 7D01 through a 50-pin [[D-sub connector]] on the right side panel only.  The DF1/DF2 and 7D01 are mechanically coupled by three nylon standoffs that slide into cutouts in the 7D01's case rails. The bottom two standoffs are fixed and are inserted first, then the connector is plugged in and the third, sliding, stand-off at the top is moved to its locked position.


The DF1/DF2 is built around a [[Motorola 6800]] microprocessor with two (DF2: three) 2K×8 masked ROMs and sixteen 1K×1 SRAMs ([[Intel 2102]]).  
The DF1/DF2 is built around a [[Motorola 6800]] microprocessor with two (DF2: three) 2K×8 masked ROMs and sixteen 1K×1 SRAMs ([[Intel 2102]]).  
Line 105: Line 105:
Tek DF1 right 0670-4661-01.jpg                  | DF1 internal, right side
Tek DF1 right 0670-4661-01.jpg                  | DF1 internal, right side
Tek DF1 left 0670-4662-00 with ROMs removed.jpg | DF1 internal, left side, ROM chips removed from sockets
Tek DF1 left 0670-4662-00 with ROMs removed.jpg | DF1 internal, left side, ROM chips removed from sockets
Tek DF1 left with ROM adapter.jpg              | DF1 internal, left side, with ROM replacement piggyback (prototype) board
Tek DF1 left with ROM adapter.jpg              | DF1 internal, left side, with [[7D01/Repairs
Tek DF1 ROM piggyback PCB.jpg                  | ROM replacement piggyback (production) board
ROM replacement piggyback board]] (prototype)  
Tek DF1 ROM piggyback PCB.jpg                  | [[7D01/Repairs|ROM replacement piggyback board]] (production)  
Tek DF1 keyboard PCB.jpg                        | DF1 front with faceplate removed, showing keyboard PCB
Tek DF1 keyboard PCB.jpg                        | DF1 front with faceplate removed, showing keyboard PCB