134/Repairs: Difference between revisions

134/Repairs (view source)

30 bytes added , 31 March 2023

m

no edit summary

1,341

edits

Revision as of 03:19, 8 March 2023 (view source) Peter (talk \| contribs) No edit summary ← Older edit		Revision as of 12:33, 31 March 2023 (view source) Jadney (talk \| contribs) mNo edit summary Newer edit →
Line 3:		Line 3:
	In both cases, it would be tempting to replace the OE supply with a modern wall wart and suitable barrel connector. One problem with this is that there is no room inside a Type 134 for the inner workings of a panel mount barrel receptacle. In addition, I've failed to find a suitable 19-20 VDC wall wart. While 19 V<sub>DC</sub> is common for laptop supplies, those are all rated for much higher currents and are much larger than necessary.		In both cases, it would be tempting to replace the OE supply with a modern wall wart and suitable barrel connector. One problem with this is that there is no room inside a Type 134 for the inner workings of a panel mount barrel receptacle. In addition, I've failed to find a suitable 19-20 VDC wall wart. While 19 V<sub>DC</sub> is common for laptop supplies, those are all rated for much higher currents and are much larger than necessary.

	If a good wall wart and a suitable barrel receptacle could be found, it would be easy to make this into a supply that worked with both 131s and 134s.		If a good wall wart, with isolated output, and a suitable inline barrel receptacle could be found, it would be easy to make this into a supply that worked with both 131s and 134s.