1,341
edits
No edit summary |
mNo edit summary |
||
Line 12: | Line 12: | ||
* [[Media:070-0468-01.pdf|Tektronix S-311 Manual]] | * [[Media:070-0468-01.pdf|Tektronix S-311 Manual]] | ||
}} | }} | ||
In contrast to the [[3S6]], which uses external sampling heads, the S-311 contains two samplers internally, like the [[3S76]] | The '''Tektronix Type S-311''' Programmable Dual-Trace Sampling Plug-In is a [[560-series plug-ins|560-series plug-in]] designed for use in a [[567]] as part of a Tektronix [[S-2000]] or [[S-3000]] series automated test systems. | ||
In contrast to the [[3S6]], which uses external sampling heads, the S-311 contains two samplers internally, like the [[3S76]] and the [[3S1]]. | |||
However, unlike the 3S76 and 3S1, the S-311 gets its signal inputs via [[BNC connector]]s on the rear panel. | However, unlike the 3S76 and 3S1, the S-311 gets its signal inputs via [[BNC connector]]s on the rear panel. | ||
The input impedance of each input is 50 Ω. | The input impedance of each input is 50 Ω. | ||
When the S-311 is inserted into the mainframe, its BNC input connectors must be manually connected, as they are not designed to pair with a corresponding connector in the plug-in bay bulkhead. The [[567]] mainframe has holes in the plug-in bay bulkhead at the location | When the S-311 is inserted into the mainframe, its BNC input connectors must be manually connected, as they are not designed to pair with a corresponding connector in the plug-in bay bulkhead. | ||
of the signal input connectors and programming connector of the S-311. | The [[567]] mainframe has holes in the plug-in bay bulkhead at the location of the signal input connectors and programming connector of the S-311. | ||
The remote programmability of the S-311 typically involves a [[262|Type 262 programmer]]. | The remote programmability of the S-311 typically involves a [[262|Type 262 programmer]]. | ||
Line 28: | Line 29: | ||
Component numbers are the same in the two models. | Component numbers are the same in the two models. | ||
The S-311 and 3S76 both have 0.4 nanosecond risetimes. | The S-311 and 3S76 both have 0.4 nanosecond risetimes. | ||
The [[sampler]] in the S-311 uses four | The [[sampler]] in the S-311 uses four Tektronix-made GaAs diodes. | ||
The S-311 does not contain a signal delay. | The S-311 does not contain a signal delay. | ||
Line 35: | Line 36: | ||
==Pictures == | ==Pictures == | ||
<gallery> | <gallery> | ||
Tek s-311 photo.png|Front | Tek s-311 photo.png | Front View. Low photo quality makes it hard to discern the perimeter of the faceplate. It is standard 560-series size. | ||
Tek s-311 right.jpg|Right | Tek s-311 right.jpg | Right View | ||
Tek s-311 left.jpg|Left | Tek s-311 left.jpg | Left View | ||
Tek s-311 relays.jpg|Reed | Tek s-311 relays.jpg | Reed Relays | ||
Tek s-311 rear.jpg|Rear | Tek s-311 rear.jpg | Rear View | ||
Tek_567_plug-in_connectors.jpg|Rear view from underneath | Tek_567_plug-in_connectors.jpg | Rear view from underneath the [[567]] plug-in bay bulkhead. Holes allow for S-311 signal input and programming signal connections. | ||
Tek s-311 no knobs.jpg|S-311 with knobs removed | Tek s-311 no knobs.jpg | S-311 with knobs removed | ||
</gallery> | </gallery> | ||
[[Category:560 series plugins]] | [[Category:560 series plugins]] | ||
[[Category:Sampling plugins]] | [[Category:Sampling plugins]] |
edits