CT-1: Difference between revisions

854 bytes added ,  29 November 2023
add specs, photos
No edit summary
(add specs, photos)
 
Line 5: Line 5:
|for=50 Ω scope inputs
|for=50 Ω scope inputs
|image=CT-1_1.jpg
|image=CT-1_1.jpg
|caption=CT-1 current transformer
|caption=CT-1 Current Transformer
|introduced=(?)
|introduced=(?)
|discontinued=(?)
|discontinued=(?)
Line 15: Line 15:
* [[Media:Tek_p6040_ct-1_1971_cat.pdf|Description of P6040 and CT-1 in 1971 Catalog]]
* [[Media:Tek_p6040_ct-1_1971_cat.pdf|Description of P6040 and CT-1 in 1971 Catalog]]
}}
}}
The '''Tektronix CT-1 current transformer''' is part of the [[P6040|P6040 current probe system]].
The '''Tektronix CT-1''' (015-0040-00) Current Transformer is part of the [[P6040|P6040 current probe system]].
It has a #6-32 threaded stud on the end opposite the output [[SMA]] connector to allow it to be mounted wherever it is needed.
Several CT-1s may be mounted in one assembly under test and monitored, in turn, by a single [[P6040]].


It was designed by [[Murlan Kaufman]].
It was designed by [[Murlan Kaufman]].
Line 21: Line 23:
==Links==
==Links==
{{Documents|Link=CT-1}}
{{Documents|Link=CT-1}}
{{BeginSpecs}}
{{Spec | Output impedance | 50 Ω }}
{{Spec | Bandwidth  | 35 kHz to 1 GHz }}
{{Spec | Risetime  | 350 ps }}
{{Spec | Sensitivity | 5 mV/mA into 50 Ω, ±3% }}
{{Spec | Input Aperture | ≥0.065" (1.6 mm) }}
{{Spec | Voltage Isolation | 1000 V }}
{{Spec | Current Rating | 500 mA<sub>RMS</sub>, Max. }}
{{Spec | Insertion Impedance | Terminated: 1 Ω // 5 μH, Un-terminated: 2 Ω // 5 μH }}
{{Spec | Capacitive Loading | 0.6 pF for a bare 20 AWG wire to 1.5 pF for a bare 14 AWG wire }}
{{EndSpecs}}


==Pictures==
==Pictures==
Line 28: Line 42:
Tek ct-1 opt08 sheet1.png
Tek ct-1 opt08 sheet1.png
Tek ct-1 opt08 sheet2.png
Tek ct-1 opt08 sheet2.png
Tek 015-040 1.JPG | Early 015-040 CT-1
Tek 015-040 2.JPG | Early 015-040 CT-1
</gallery>
</gallery>


[[Category:Oscilloscope current probes]]
[[Category:Oscilloscope current probes]]
1,341

edits