S-6
The S-6 sampling plug-in head is a 50 Ω feedthrough unit with a rise-time of 30 ps and bandwidth of 11.5 GHz. It was introduced in 1971. The S-6 provides two unterminated 50 Ω SMA connections in a loop-through configuration. Always use a termination on the unit to give a minimum protection against electrostatic discharge at handling.
Specifications
- Rise time: 30 ps
- Bandwidth: 11.5 GHz
- Input impedance: 50 Ω (unterminated!)
- Noise: < 5 mV of noise
- No internal trigger pick-off signal
- No internal termination
Links
- S-6 internal photo and simulation
- Repairing an S-6 head (with internal photos)
Pictures
-
Impulse taken with S6 sampling head. Every dot is measured at an solely Impulse combined on the CRT with a rate of app. 100Hz. Bright dots are newer than dimmed one.
-
-
