Nelson-Ross PSA-011

From TekWiki
Revision as of 02:55, 11 September 2014 by Peter (talk | contribs) (subcat)
Jump to navigation Jump to search

Template:Plugin Sidebar 2 The Nelson-Ross PSA-011 is a spectrum analyzer plug-in for 500-series scopes. The center frequency range is 10 Hz to 20 kHz. It can display amplitude in linear or log scale.

The input is high-impedance and is AC-coupled. The PSA-011 is a single-conversion architecture with a pair of 6BH6 tubes serving as a balanced mixer. After IF filtering and amplification, the signal is detected using a 1N34A germanium diode. The detected voltage from the diode directly drives pin 3 (vertical -) of the scope plug-in interface connector. Pin 1 (vertical +) of the scope plug-in interface connector is fed a DC vertical position voltage by the PSA-011.

The voltage-controlled local oscillator is tuned using a variable-reactance tube, V6, a 6201.

There were at least two major versions produced, without changing the model number. Compare the picture from the manual below with the other front panel photographs.

There was also a tracking generator, called the Nelson Ross 101 SYNCHRO-SWEEP Generator. These are very rare.

Specifications

please add

Pictures

  • Front panel, as shown in manual.

    Front panel, as shown in manual.

  • Front

    Front

  • Front 2

    Front 2

  • Front right

    Front right

  • Front left

    Front left

  • Bottom

    Bottom

  • Bottom 2

    Bottom 2

  • Left

    Left

  • Rear right

    Rear right

  • Rear

    Rear

  • Rear 2

    Rear 2

  • Rear 3

    Rear 3

  • Schematic

    Schematic

Retrieved from "https://w140.com/tekwiki/index.php?title=Nelson-Ross_PSA-011&oldid=12921"