1A2

The Tektronix 1A2 is a two-channel plug-in amplifier for 500-series scopes. It provides a -3dB point of 50MHz in a 544, 546, or 547, and 50mV/div sensitivity. It uses a 7586 nuvistor at the front end as a cathode follower. Then one input of an NPN differential amplifier is driven to produce a differential current-mode signal at the collectors. Silicon diodes form an analog multiplexer that switches between the two inputs. A cross-coupled pair of PNP transistors forms a multivibrator that generates the voltages that control the diodes that select the input channel.

Type 1A2 was introduced in 1964 together with Types 1A1, 543B, 545B, 544, 546, and 547. It was designed to replace the venerable Type CA, while the Type 1A1 delivered ten times the sensitivity at a higher price. They share some mechanical design, but the circuits have few details in common.