067-0532-01
The Tektronix Type 067-0532-01 Calibration Fixture is a Constant Amplitude Signal Generator whose output is a low-distortion sinewave. It is intended to provide a signal of known frequency and amplitude for measuring oscilloscope bandwidth.
A 3 MHz sinewave is available as a reference amplitude from which a -3 dB measurement can be made. The output connector, amplitude detector, and 50 Ω source resistor are at the end of a 42 inch cable. The amplitude is regulated at the end of the cable adjacent to the GR-874 output connector, thus essentially eliminating cable loss and standing-wave errors.
Key Specifications
| — Frequency — | |
| Range | 65 MHz to 500 MHz |
| Accuracy | Within 2% of indicated frequency |
| 3 MHz Frequency Accuracy | Within 5% |
| — Amplitude — | |
| Range | 0.5 Vp-p to 4 Vp-p into 50 Ω in 0.5 V increments |
| Variable | Continuously variable between calibrated steps. Max. output 4.2 V |
| 3 MHz Amplitude Accuracy | Within 2% of indicated amplitude |
| — Constant Amplitude Accuracy — | |
| 65 MHz to 300 MHz | Within 2% of indicated amplitude |
| 300 MHz to 500 MHz | Within 5% of indicated amplitude |
| Output Source Impedance | 50 Ω within 1% |
Manuals
Pictures
-
Front View
-
Left Side
-
Top Internal
-
Bottom Internal
-
Left Internal
-
Right Internal
-
Signal Generator Circuit
-
Line Filter Board
