7A42
The Tektronix 7A42 is a four-channel 350 MHz plug-in for 7000-series scopes.
It was specifically designed for logic signals (TTL, ECL, CMOS) and supports triggering based on Boolean conditions of the four inputs.
A fifth trace, "Trigger View", displays the trigger function output or external clock input.
The input V/Div setting can only be seen in the mainframe's readout.
Tektronix recommended the P6131 10 MΩ probe, and the P6230 variable-offset 450 Ω probe for ECL circuits.
Key Specifications
Bandwidth | 350 MHz |
---|---|
Deflection |
|
Input impedance | 1 MΩ or 50 Ω |
Max. input voltage |
|
Trigger level |
|
Hysteresis | 40 mV (TTL), 8 mV (ECL) (or ×10) |
Features |
|
Weight | 2.8 kg / 6.2 lb |
Internals
The 7A42's functions are controlled by an Intel 8085A microprocessor.
Each of the four input attenuator circuits contains five miniature relays. The bistable relay coils are wired in a 4x5 matrix.
The 7A42 contains its own switch mode PSU, based on an SG3524 controller, that generates +5 V, −2 V and −5 V from the mainframe's ±50 V rails.
See Also
Pictures
-
-
-
-
-
-
-
-
-
display - four signal traces plus trigger view
-
-
7A42 rear view
-
7A42 top view
-
memory backup battery
-
internal switch mode PSU for digital logic supplies
-
microprocessor board
-
amplifier board front - attenuators, amplifiers, channel switches
-
amplifier board rear - channel switches, two 15 ns delay lines
-
-
-
-
-