TDS754
The Tektronix TDS754 is a 500 MHz, 2 GS/s quad-channel digital storage scope.
Key Specifications
| Bandwidth and Channels | 500 MHz; 2 Channels |
|---|---|
| Vertical Sensitivity | 1 mV to 10 V/div with calibrated fine adjustment |
| Time Base Range | 500 ps to 10 s/div |
| Sample Rate | 2.0 GS/s on 1 channel ; 2.0 GS/s on 2 channels ; 1 GS/s on 3 or 4 channels |
| Record Length | 50 K points each channel |
| Record Length (1M Option) | 500 K points on 1 channel; 250 k points on 2 channels ; 130 k points on 3 or 4 channels |
| Record Length (2M Option) | 8 M points on 1 channel; 4 M points on 2 channels ; 2 M points on 3 or 4 channels |
| Interface | GPIB standard ; RS-232 interface ; Centronics interface |
| Options |
|
Software
- TDS520B Field Adjustment Software 063-2601-00 (ZIP)
- TDS520C Field Adjustment Software 063-2774-01 (ZIP)
- TDS520C/520D V1.129 Field Adjustment Software (ZIP)
- TDS520C/520D V1.129 Field Adjustment Software 063-3289-01 (ZIP)
- Tektronix TDS300, 400, 500, 600, 700, 800 AWE Drivers 066-0087-00 (ZIP)
- Telecom Test and I-Pattern Software TTiP 066-0119-00 (ZIP)
- Enhanced Printing Utility for TDS Family 066-0125-00 (ZIP)
- TDS runtime Environment TDSRTE1 066-0127-00 (ZIP)
- Tektronix TDS500C/700C Custom Masks 066-0165-00 (ZIP)
- Tektronix Wavestar 2012.05.09.11.07.29 16456 EN 066-0934-03 (ZIP, 102MB) Product Key: WSTRO618650124
Firmware
- TDS754C v5.0e Firmware (ZIP)
- TDS754C v5.2e Firmware (ZIP)
- TDS754C v5.3e Firmware (ZIP)
- TDS754D v6.3e Firmware (ZIP)
- TDS754D v6.4e Firmware (ZIP)
- TDS754D v7.1.1e Firmware (ZIP)
- TDS754D v7.2e Firmware (ZIP)
- TDS754D v7.4e Firmware (ZIP)
Links
- Conversion of 500 MHz TDS744A to 1 GHz TDS784A
- Simmconn Labs LCD replacement kits for CRT-based TDS O-scopes
- EEVBlog Forum thread on TDS options and how to enable them
- Enabling options via GPIB interface - ko4bb.com
Internals
The TDS754C&D and TDS784C&D series are nearly identical, differences being front-panel cosmetics and the presence (754) or absence (784) of a few capacitors on the acquisition board. The only other difference is the position of instrument ID jumpers, also on the acquisition board. In fact, it is entirely possible to convert a 754 to a 784 (see above Links and the TDS784 page for more information).
Note that in the TDS700D series, the acquisition board variant is important — the CPU Board with Firmware 7.xx cannot be used together with the old acquisition board, and the CPU board with old Firmware 6.xx doesn't run with the new acquisition board. The fact that the CPU board has part number 671-4349-00 is by itself not a reliable indication of a compatible firmware version.
Pictures
TDS754A
-
TDS754A front
-
TDS754A rear
TDS754C
-
TDS754C front
TDS754D
-
TDS754D runs into DPO-mode
-
TDS754D Acquisition board, early model (SN B040000 below)
-
TDS754D Acquisition board, later model (SN B040000 upper), 2M option ready
Common
-
Option 05 Internal Parts
-
Option HD Internal Parts, 2.5" Disk Version
-
Option HD Internal Parts, PCMCIA Disk Version
Assembly part numbers
| Assy | Description | TDS754A P/N | TDS754C P/N | TDS754D P/N |
|---|---|---|---|---|
| A10 | Acquisition board | 671-1476-05 | 671-4039–01 | 679-4165-0x/679-4771-01 |
| A10 | Acquisition board (1M Opt.) | - | 671-4041–00 | 679-4166-0x/679-4771-01 |
| A10 | Acquisition board (2M Opt.) | - | - | 679-4771-01 |
| A11 | DRAM/CPU/Display board (inlc. 1M Opt.) | - | 671-4003–00 / 671-4172–00 | 671-4172–00 / 671-4349-00 |
| A11 | DRAM/CPU/Display board (only 2M Opt.) | - | - | - |
| A12 | Front panel assembly | - | 614-0937–02 | 614-0953–00 |
| A14 | D1 Bus | - | 671-2847-00 | 671-2847-00 |
| A14 | D1 Bus (Opt. 05) | - | 671-2848-00 | 671-2848-00 |
| A15 | Attenuator assembly | - | - | - |
| A16 | Power supply unit | - | 620–0063–04 | 620-0063-05 |
| A20 | CRT Display assembly | - | 640–0077–04 | 640–0077–11 |
| A23 | RS232/Centronics assembly | 640-2437-00 | 640-2437-00 | 640-2437-00 |