P6601/Repairs

From TekWiki
Revision as of 03:59, 8 May 2023 by Peter (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

For repair or for building your own temperature sensor you need a PT1-100 sensor and a LEMO connector.

The LEMO connector:

  • Series: S
  • The diameter: 0S (S-Series, diameter 0)
  • Insert configuration: 302 (2 pins)


The following LEMO configuration is known to fit:

  • Connector: FFA0S302CLA (2.2 to 4.4 mm cable)
  • Bend relief: GMA0B035 (3.5 to 3.9 mm cable)

As the PT-100 is connected with only 2 wires, each sensor has to be trimmed (offset) in the connected device.

Retrieved from "https://w140.com/tekwiki/index.php?title=P6601/Repairs&oldid=81565"