067-1436-00

From TekWiki
Revision as of 05:14, 4 October 2023 by Peter (talk | contribs)
Jump to navigation Jump to search
Tektronix 067-1436-00
Calibration fixture
Communication Pod

Produced from (?) to (?)

Manuals
(All manuals in PDF format unless noted otherwise)
Manuals – Specifications – Links – Pictures

The Tektronix 067-1436-00 Communications Pod was used between a PC and a TAS400, TDS300, or THS700 series oscilloscopes to download firmware to the instrument. It uses both a serial port and GPIB at the same time along with specific PC software.

The ribbon cable connects directly to the CPU board on TAS400 and main board on TDS300 series scopes, while THS700 series scopes used an adapter cable to connect to the socket on its mainboard.

The green RJ45 connector on top seen in the pictures is not original.

Software

Pictures

  • THS700 Adapter Cable

    THS700 Adapter Cable

  • THS700 Adapter Cable

    THS700 Adapter Cable

Retrieved from "https://w140.com/tekwiki/index.php?title=067-1436-00&oldid=86043"