DC503/Repairs

From TekWiki
Revision as of 03:48, 1 December 2023 by Peter (talk | contribs)
Jump to navigation Jump to search

Repair Issues

  • If no LED or display segment is lit after trun on, check for +15 V from U500 Voltage regulator IC type 723.
  • All ICs are placed in IC sockets. Contact problems can occur. Removing and inserting ICs helps.
  • Check board is mounted to frame with plastic washers in between near pcb conductor tracks, otherwise a short to GND can occur.
Retrieved from "https://w140.com/tekwiki/index.php?title=DC503/Repairs&oldid=88922"