P6460

Manuals – Specifications – Links – Pictures

The Tektronix P6460 Data Acquisition Probe may be used with DAS9100, 91A24, 91AE24, 91S16, 1240D1, or 1240D2 Logic Analyzers. It may also be used with and is required for the DP100 Digital Video Probe plug-in used in the TM500 mainframes. It provides 9 data channels plus one clock channel when used with a 1240/1241 or 8 data channels, one qualifier channel and one clock channel when used with a DAS9100. Different labels indicating these configurations were initially provided with the probe.

The P6460 uses the P64xx-family 10-wire input lead harnesses with 0.2" connectors. Is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs.

Key Specifications

Maximum Clock Frequency	?
Data channel Bandwidth	100 MHz
Minimum Pulse Width	4 ns
Input Signal Level	-40 V to +10 V above threshold (+30 V for RS232)
Threshold Voltage	provided from Logic Analyzer
Input Capacitance	5 pF
Non-destructive Input Voltage Range	±40 V
Maximum Voltage between any two Inputs	±60 V

Links

• Tek P6460 @ barrytech.com (waybackarchive)

Pictures

• 
• 

  P6460 probe with accessories (1× 012-0747-00 lead set, 2×012-0989-00 Ground leads)

• 
• 
• 
• 
• 

  012-0989-00 Ground leads

• 
•