067-0066-00: Difference between revisions
No edit summary |
No edit summary |
||
Line 3: | Line 3: | ||
|series=661 | |series=661 | ||
|type=067-0066-00 | |type=067-0066-00 | ||
|summary= | |summary=Calibration fixture | ||
|image= | |image=Tek 661 vertical test load unit 1.jpg | ||
|caption= | |caption=Tek 661 Vertical Test Load Unit | ||
|introduced= | |introduced=1961 | ||
|discontinued=(?) | |discontinued=(?) | ||
|designers= | |designers= | ||
|manuals= | |manuals= | ||
* [[Media:067-0066-00.pdf|Tektronix 067-0066-00 Manual ( | * [[Media:067-0066-00.pdf|Tektronix 067-0066-00 Manual]] (OCR) | ||
}} | }} | ||
The '''Tektronix 067-0066-00''' is a pair of calibration fixtures for the [[661|661 oscilloscope]], one | The '''Tektronix 067-0066-00''' is a pair of calibration fixtures for the [[661|661 oscilloscope]], one "Sweep Test Load Unit" and one "Vertical Test Load Unit". | ||
The '''Vertical Test Load Unit''' serves a similar purpose to the [[TU-4]] (for the 560-series) and [[1M1]] (for the 500-series), for testing the power supplies and interconnections. | |||
It contains load resistors for testing the mainframe's power supply, as well as a switch for testing the wiring between the plug-in interface and the multi-pin digital output connector on the rear of the 661 mainframe. There is a banana connector on the front of the plug-in that is wired to the +300 V pin on the interface connector via a fuse. | |||
The '''Sweep Test Load Unit''' has a [[UHF connector]] for an external 150 V sawtooth signal to check the sweep. ''please expand'' | |||
[[Category:Calibration fixtures ]] | {{MissingSpecs}} | ||
==Pictures== | |||
<gallery> | |||
Tek 661 vertical test load unit 1.jpg | |||
Tek 661 vertical test load unit 2.jpg | |||
Tek 661 vertical test load unit 3.jpg | |||
Tek 661 vertical test load unit 4.jpg | |||
</gallery> | |||
[[Category:Calibration fixtures]] |
Revision as of 03:34, 16 August 2023
The Tektronix 067-0066-00 is a pair of calibration fixtures for the 661 oscilloscope, one "Sweep Test Load Unit" and one "Vertical Test Load Unit".
The Vertical Test Load Unit serves a similar purpose to the TU-4 (for the 560-series) and 1M1 (for the 500-series), for testing the power supplies and interconnections.
It contains load resistors for testing the mainframe's power supply, as well as a switch for testing the wiring between the plug-in interface and the multi-pin digital output connector on the rear of the 661 mainframe. There is a banana connector on the front of the plug-in that is wired to the +300 V pin on the interface connector via a fuse.
The Sweep Test Load Unit has a UHF connector for an external 150 V sawtooth signal to check the sweep. please expand
Key Specifications
- please add