133: Difference between revisions

62 bytes added ,  9 May 2014
no edit summary
No edit summary
No edit summary
Line 1: Line 1:
The Tektronix 133 is an external enclosure and power supply for a [[letter-series_and_1-series_plug-ins|letter-series or 1-series plug-in]].  It was [[introduced in 1961]].
The Tektronix 133 is an external enclosure and power supply for a [[letter-series_and_1-series_plug-ins|letter-series or 1-series plug-in]].  It was [[introduced in 1961]].
The enclosure supplies power to the plug-in and the outputs from the plug-in are available.   
The enclosure supplies power to the plug-in and the outputs from the plug-in are available.   
The bandwidth of the 133's outputs is 100Khz, which is much slower than the 16MHz bandwidth of the [[132]].   
The bandwidth of the 133's outputs is 100 kHz, which is much slower than the 16 MHz bandwidth of the [[132]].   
However, the 133 has a 2-ohm output impedance compared to 5k-ohms for the [[132]]
However, the 133 has a 2 Ω output impedance compared to 5 kΩ for the [[132]], and the 133 can drive 1.5 amperes at its output, versus a maximum of 10 mA for the [[132]].
And the 133 can drive 1.5 amperes at its output, versus a maximum of 10mA for the [[132]].


* [[list of manuals that are needed|Manual needed]]
* [[list of manuals that are needed|Manual needed]]
Line 18: Line 17:
Image:133bottom.jpg|bottom view shows solid state rectifiers and capacitors for low-voltage high-current output amplifier
Image:133bottom.jpg|bottom view shows solid state rectifiers and capacitors for low-voltage high-current output amplifier
</gallery>
</gallery>
[[Category:Specifications needed]]
[[Category:Manual needed]]