230: Difference between revisions

Jump to navigation Jump to search
No edit summary
No edit summary
Line 19: Line 19:
Just like the 6R1A was an evolutionary step forward from the 6R1,  
Just like the 6R1A was an evolutionary step forward from the 6R1,  
the circuitry in the 230 is an evolutionary step forward from the 6R1A.
the circuitry in the 230 is an evolutionary step forward from the 6R1A.
The 230 does not contain any tubes or [[tunnel diodes]].
It makes some use of integrated circuits and extensive use of
[http://en.wikipedia.org/wiki/Reed_relay reed relays]. 


The 230 was distributed by itself (usually for use with a 568) and also
The 230 was distributed by itself (usually for use with a 568) and also
Line 46: Line 43:
One exception to this is the CRT intensifier signal, which is sent by the 230 to the 568.
One exception to this is the CRT intensifier signal, which is sent by the 230 to the 568.
This signal intensifies the trace in the various zones,
This signal intensifies the trace in the various zones,
which are configured on the 230 or remotely using a [[241]] programmer.
which are configured on the 230 or remotely using a [[241|241 programmer]].


{{MissingSpecs}}
{{MissingSpecs}}


==Internals==
==Internals==
The 230 does not contain any tubes or [[tunnel diodes]].
It makes some use of integrated circuits and extensive use of
[http://en.wikipedia.org/wiki/Reed_relay reed relays]. 
The power supply in the Tektronix 230 is linear and provides regulated of +50 V, +12 V, +3.8 V, +1.75 V,
The power supply in the Tektronix 230 is linear and provides regulated of +50 V, +12 V, +3.8 V, +1.75 V,
-3.5 V, and -50 V.  It also provides a +255 V unregulated output.  The power supply transformer, electrolytic
−3.5 V, and −50 V.  It also provides a +255 V unregulated output.  The power supply transformer, electrolytic
capacitors, and output transistors are part of the chassis, not a removable unit.  Thue regulator circuits
capacitors, and output transistors are part of the chassis, not a removable unit.  The regulator circuits are on a circuit card.
are on a circuit card.


Most of the circuitry of the 230 is on circuit cards that plug into a backplane bus.
Most of the circuitry of the 230 is on circuit cards that plug into a backplane bus.