2465A: Difference between revisions

{{Oscilloscope Sidebar  

|manufacturer=Tektronix  

|series=2400-series scopes

|model=2465A  

|summary=Portable 150/250/350 MHz 4-ch scope  

|image=Tek2465A.jpg  

|caption=Tektronix 2465A  

|introduced=1986  

|discontinued=(?)  

|designers=Art Metz; Ken Schlotzhauer; Walt Ainsworth

|manuals=

The '''Tektronix 2465A''' is a four-channel 350 MHz portable oscilloscope.  The '''2445A''' and '''2455A''' are 150 and 250 MHz versions. CRT is the [[154-0850-01]].

The '''[[2467]]''' and '''[[2467B]]''' are the same as the 2465A, except that the 2465A uses a conventional CRT while the 2467 and 2467B use a [[micro-channel plate CRT]] that enables bright traces at fast sweep rates, particularly with one-shot or low repetition rate signals.

The horizontal amplifier in the 2465A was designed by [[Art Metz]] and [[Ken Schlotzhauer]]. Art Metz also worked on the triggers. Art Metz and [[Walt Ainsworth]] designed the sweeps.

{{Spec | Bandwidth       | 2455: 150 MHz; 2455A: 250 MHz; 2465A: 350 MHz;

{{Spec | Sweep Rate     | 500 ps/div }}

{{Spec | Channels       | Four independent channels }}

{{Spec | Vertical       | 2 mV/div vertical sensitivity }}

{{Spec | Cursors         | Delta Volts and Delta Time Cursors }}

{{Spec | CRT Readout     | Scale Factors, Trigger Level, Voltage, Time, Frequency, Phase and Ratio Measurements and Mode Indicators }}

{{Spec | Trigger         | 500 MHz min.; Advanced Triggering with "Hands Off" Auto Level Triggering }}

{{Spec | Input Impedance | 50 Ω/1 MΩ inputs with 50 Ω protection }}

{{Spec | Probes         | Two or four [[P6136]] ×10 probes, 1.3 m  }}