2715: Difference between revisions

Jump to navigation Jump to search

2715 (view source)

Revision as of 05:59, 24 October 2021

103 bytes added ,  24 October 2021
no edit summary
No edit summary
No edit summary
(4 intermediate revisions by one other user not shown)
Line 24: Line 24:
Additional features include Digital Storage Display (selectable acquisition modes of positive peak only, positive/negative peak, Max hold, Waterfall, and an analog sweep when digital storage is off), Ensemble Averaging, Internal Preamp, Internal Calibrator (accessed through Input Menu), Alternate Reference Level Units (dBm, dBmV, dBV, dBµV, dBµW, and dBµV/m), User-Definable Power-on Status, Center Measure, Graticule Illumination (for CRT photography), and Direct Plot/Print (Printers via Opt. 03 GPIB, or RS-232-C interface via Opt. 08).
Additional features include Digital Storage Display (selectable acquisition modes of positive peak only, positive/negative peak, Max hold, Waterfall, and an analog sweep when digital storage is off), Ensemble Averaging, Internal Preamp, Internal Calibrator (accessed through Input Menu), Alternate Reference Level Units (dBm, dBmV, dBV, dBµV, dBµW, and dBµV/m), User-Definable Power-on Status, Center Measure, Graticule Illumination (for CRT photography), and Direct Plot/Print (Printers via Opt. 03 GPIB, or RS-232-C interface via Opt. 08).


Front panel inputs/outputs are: RF INPUT [[BNC connector]] (75Ω, +20 dBm Max, 100 V DC blocking capacitor); and OPTION [[Unknown connector]] (Service manual only indicates that the front panel position is for a '''Future Option'''.  No internal tracking generators were available like with the other 2710, 2711, and 2712).
Front panel inputs/outputs are: RF INPUT, [[BNC connector]] (75 Ω, +20 dBm Max, 100 V DC blocking capacitor); and OPTION Unknown connector (Service manual only indicates that the front panel position is for a '''Future Option'''.  No internal tracking generator was available like with the 2710, 2711, and 2712).


Rear panel inputs/outputs are: J101 [[SMA connector]] (Female SMA installed for Opt. 15), J102 EXT TRIG [[BNC connector]] (10 kΩ, 50V (DC + peak AC)), J103 [[DB15 connector]] Female (Not RS-232 compatible.  Accessory connector: Pin 1 Video Input, Pin 2 Ground, Pin 3 Video Output, Pin 6 Sweep Gate, Pin 7 Sweep Output, all others unused), J104 Opt. 03: [[GPIB connector]] (IEEE Std 488 connector) or Opt. 08: [[RS-232 interface]] (Digital Communication Port.).
Rear panel inputs/outputs are: J101 [[SMA connector|Female SMA]] installed for Opt. 15; J102 EXT TRIG, [[BNC connector]] (10 kΩ, 50 V (DC + peak AC)); J103 [[D-sub connector|female DB15 connector]] Accessory connector (Pin 1 EXTVIDEO, Pin 2 SWPGATE, Pin 3 Ground, Pin 4 SWP, Pin 5 LOGVID, Pin 6 CLK0, Pin 7 DATAI, Pin 8 DATAO, Pin 9 EXTGLATCH, Pin 10 26.38 MHz, Pin 11 VLVL, Pin 12 SWPSLOPE, Pin 13, 14, 15 Unused); J104 Opt. 03: [[GPIB connector]] (IEEE Std 488 connector) or Opt. 08: [[D-sub connector|DB9 connector]], Digital Communication Port - [[RS-232 interface]]


{{BeginSpecs}}
{{BeginSpecs}}
Retrieved from "https://w140.com/tekwiki/wiki/Special:MobileDiff/70050...70055"

Navigation menu