465: Difference between revisions

Line 16:

* [[Media:070-1861-00_C.pdf|465 Service B250000+]] (Color OCR PDF, 58M)

* [[Media:070-2191-00.pdf|465 Option 5 Supplement]] (PDF)

====465B====

Line 54:

Line 53:

{{Spec | Rise time | 3.5 ns for 0°C to +40°C and 4.2 ns from +40°C to +55°C}}}

{{Spec | ~~Maximum Input Voltage~~ | 500 V DC (250 VDC when DC coupled) + Peak AC or 500 Vp-p AC at < 1 kHz }}

{{Spec | Input Voltage | max. 500 V DC (250 VDC when DC coupled) + Peak AC or 500 Vp-p AC at < 1 kHz }}

{{Spec | Trigger Coupling ~~Modes~~ | DC, AC, LF Reject, HF Reject}}

{{Spec | Z Axis Input | 5 Vp-p signal causes noticeable modulation at normal intensity }}

{{Spec | Z Axis Input | DC to 50 MHz; 5 Vp-p signal causes noticeable modulation at normal intensity }}

~~{{Spec | Z Axis Frequency response | DC to 50 MHz~~ }}

{{Spec | CRT ~~Graticule Area | 8 cm × 10 cm }}~~

{{Spec | CRT | [[154-0676-10]] tube, P31 [[phosphor]], 18.5 kV acceleration, 8 cm × 10 cm graticule }}

~~{{Spec | CRT Phosphor~~| P31 }}

~~{{Spec | CRT Accelerating Potential |~~ 18.5 kV }}

{{Spec | Line Voltage | 110/115/120/220/230/240 VAC ±10%, selected via primary voltage selector and regulating range selector assembly, 48 Hz to 440 Hz }}

Line 71:

Line 67:

The 465 uses tunnel diodes with Tek part number 152-0125-00,

which are equivalent to [[TD3A]], and [[155-0032-00]] chips (their -01 grade) as trigger amplifiers.

~~The CRT is part number [[154-0676-10]].~~

==Links==

@@ Line 16: / Line 16: @@
 * [[Media:070-1861-00_C.pdf|465 Service B250000+]] (Color OCR PDF, 58M)
 * [[Media:070-2191-00.pdf|465 Option 5 Supplement]] (PDF)
 ====465B====
@@ Line 54: / Line 53: @@
 {{Spec | Rise time | 3.5 ns for 0°C to +40°C and 4.2 ns from +40°C to +55°C}}}
 {{Spec | Input Impedance | 1 MΩ ±2% // 20 pF }}
-{{Spec | Maximum Input Voltage | 500 V DC (250 V<sub>DC</sub> when DC coupled) + Peak AC or 500 V<sub>p-p</sub> AC at < 1 kHz }}
+{{Spec | Input Voltage | max. 500 V DC (250 V<sub>DC</sub> when DC coupled) + Peak AC or 500 V<sub>p-p</sub> AC at < 1 kHz }}
-{{Spec | Trigger Coupling Modes | DC, AC, LF Reject, HF Reject}}
+{{Spec | Trigger Coupling | DC, AC, LF Reject, HF Reject}}
-{{Spec | Channel Isolation | 100:1 at 25 MHz }}
+{{Spec | Channel Isolation | 100:1 at 25 MHz }}
-{{Spec | Z Axis Input | 5 V<sub>p-p</sub> signal causes noticeable modulation at normal intensity }}
+{{Spec | Z Axis Input | DC to 50 MHz; 5 V<sub>p-p</sub> signal causes noticeable modulation at normal intensity }}
-{{Spec | Z Axis Frequency response | DC to 50 MHz }}
 {{Spec | Output Signals | CH1 Vertical, A & B +Gate}}
-{{Spec | Calibrator Output  | ~1 kHz, 300 mV, square wave}}
+{{Spec | Calibrator  | ~1 kHz, 300 mV, square wave}}
-{{Spec | CRT  Graticule Area | 8 cm × 10 cm  }}
+{{Spec | CRT | [[154-0676-10]] tube, P31 [[phosphor]], 18.5 kV acceleration, 8 cm × 10 cm graticule }}
-{{Spec | CRT  Phosphor| P31  }}
-{{Spec | CRT Accelerating Potential | 18.5 kV }}
 {{Spec | Line Voltage | 110/115/120/220/230/240 V<sub>AC</sub> ±10%, selected via primary voltage selector and regulating range selector assembly, 48 Hz to 440 Hz }}
 {{Spec | Power Consumption | 75 W @ 115 V<sub>AC</sub> / 60 Hz}}
@@ Line 71: / Line 67: @@
 The 465 uses tunnel diodes with Tek part number 152-0125-00,
 which are equivalent to [[TD3A]], and [[155-0032-00]] chips (their -01 grade) as trigger amplifiers.
-The CRT is part number [[154-0676-10]].
 ==Links==

465: Difference between revisions

Navigation menu