543: Difference between revisions
No edit summary |
No edit summary |
||
| Line 8: | Line 8: | ||
manuals= | manuals= | ||
* [http://bama.edebris.com/download/tek/543/Tek%20543.pdf Tektronix 543 Manual (PDF)] | * [http://bama.edebris.com/download/tek/543/Tek%20543.pdf Tektronix 543 Manual (PDF)] | ||
* [http://w140.com/tek_543b.pdf Tektronix 543B Manual (PDF)] | * [http://w140.com/tek_543b.pdf Tektronix 543B Manual (PDF)] | ||
* [ | * [[Media:070-429.pdf|Tektronix 543B Manual(PDF, OCR)]] | ||
* [http://w140.com/tek_fcp/tek_adjust_540_vert_delay.pdf How to Adjust the Vertical Amplifier and Delay Line of a 540-Series Oscilloscope (PDF)] | * [http://w140.com/tek_fcp/tek_adjust_540_vert_delay.pdf How to Adjust the Vertical Amplifier and Delay Line of a 540-Series Oscilloscope (PDF)] | ||
* [[Media:tek_adjust_540_vertical.pdf|How to Adjust the Vertical Amplifier and Delay Line of a 540-Series Oscilloscope (PDF, OCR)]] | |||
* [ | * [http://w140.com/tek_fcp/tek_543_fac_cal.pdf Tektronix 543 Factory Calibration Manual (PDF)] | ||
* [[Media:tek_543_fcp.pdf|Tektronix 543 Factory Calibration Manual (PDF, OCR)]] | * [[Media:tek_543_fcp.pdf|Tektronix 543 Factory Calibration Manual (PDF, OCR)]] | ||
<!-- * [http://w140.com/tek_balancing_545_vert.pdf Balancing the 540-Series Vertical Amplifier (PDF)] --> | |||
* [[Media:tek_balancing_545_vertical.pdf|Balancing the 540-Series Vertical Amplifier (PDF, OCR)]] | * [[Media:tek_balancing_545_vertical.pdf|Balancing the 540-Series Vertical Amplifier (PDF, OCR)]] | ||
}} | }} | ||
The '''Tektronix Type 543''' (rack mount '''RM43''') is an all-tube 30 MHz scope [[introduced in 1958]]. | The '''Tektronix Type 543''' (rack mount '''RM43''') is an all-tube 30 MHz scope [[introduced in 1958]]. | ||
Revision as of 18:32, 14 October 2018
The Tektronix Type 543 (rack mount RM43) is an all-tube 30 MHz scope introduced in 1958. It takes letter-series and 1-series plug-ins. It is similar to a 545, but without the second, delayed timebase. Instead, it has a range of horizontal magnifiers from ×2 to ×100.
The 543 has the same six-stage balanced distributed amplifier (twelve 6DK6 tubes) as the 545, driving a lumped L/C delay line just before the deflection plates.
While the 545 has two non-calibrated X-input sensitivities, the 543 has an X input with calibrated deflection sensitivity of 0.1 V/cm, 1 V/cm, or 10 V/cm.
Total acceleration voltage on the CRT is 10 kV. The CRT power supply uses five 5642 HV tube diodes. The standard CRT for the 543 is the T65 with P2 phosphor, part number 154-175.
The 543B is a tube/transistor hybrid scope. The vertical amplifier has a 6DJ8 cathode follower stage followed by two transistor/tube cascode stages with a 186 Ω delay line in-between. The standard CRT for the 543B is part number 154-0478-00, also known as the T5470-31-2. There is a rackmount version, Type RM543B.
Specifications
please add
Pictures
-
-
543
-
543B with CA
-
543
-
543
-
543
-
543
-
543
-
RM543B
-
RM543B side
-
543B
-
543B
-
543 Block Diagram
-
543 Horizontal Amplifier
-
543 Vertical Amplifier
-
543 Trigger
-
543 Timebase
-
543 Delay Line
-
543 CRT Circuit
-
543 Low-Voltage Power Supply
-
543 Calibrator
