36,230
edits
5XP: Difference between revisions
Jump to navigation
Jump to search
no edit summary
No edit summary |
No edit summary |
||
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
{{CRT | |||
|Manufacturer=DuMont | |||
|Model=5XP | |||
|Part_nos= | |||
|Description=family of flat-faced 5" CRTs | |||
|Used_in=513;517; | |||
|Designers= | |||
}} with [[multi-band acceleration | multi-band post accelerators]], produced from 1948 onward. | |||
A 5XP-A series with tighter tolerances followed in 1953, and then a 5XP-B range in 1954 that had an aluminized screen for higher brightness. | A 5XP-A series with tighter tolerances followed in 1953, and then a 5XP-B range in 1954 that had an aluminized screen for higher brightness. | ||
| Line 7: | Line 15: | ||
Maximum post-acceleration voltage for the 5XP is 25.5 kV. | Maximum post-acceleration voltage for the 5XP is 25.5 kV. | ||
Typical conditions are stated as | Typical conditions are stated as −2 kV on the cathode and +12 kV on the post-acceleration anode. | ||
The 5XP was used in early models of the [[513]] and [[517]], before Tektronix switched these to Tek-made CRTs. | The 5XP was used in early models of the [[513]] and [[517]], before Tektronix switched these to Tek-made CRTs. | ||
| Line 20: | Line 28: | ||
Dumont 5xp11 1.jpg | DuMont 5XP11 | Dumont 5xp11 1.jpg | DuMont 5XP11 | ||
Dumont 5xp11 2.jpg | DuMont 5XP11 | Dumont 5xp11 2.jpg | DuMont 5XP11 | ||
Tek_517_with_5xp_crt.jpg|5XP in a [[517]] | |||
</gallery> | </gallery> | ||
[[Category:Cathode ray tubes]] | [[Category:Cathode ray tubes]] | ||