7A15: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 13: | Line 13: | ||
}} | }} | ||
The '''7A15''' is a single channel, 80 MHz general-purpose vertical amplifier for [[7000-series scopes]]. The '''AM-6565/U''' (aka '''7A15N11''') is the military version of this amplifier. A | The '''7A15''' is a single channel, 80 MHz general-purpose vertical amplifier for [[7000-series scopes]]. The '''AM-6565/U''' (aka '''7A15N11''') is the military version of this amplifier. A Department of the Army Technical Bulletin (see [[#Links|links]] section) suggests that it was used with the [[7603]] and its military version (the AN/USM 281C). | ||
The 7A15A is a fully discrete design | The 7A15A is a fully discrete design (i.e. no integrated circuits), built mostly from BJTs, with a [[151-1032-00]] dual JFET as the front-end buffer. | ||
{{BeginSpecs}} | |||
{{Spec | Bandwidth | 0 – 80 MHz (DC), 1 Hz – 80 MHz (AC) }} | |||
{{Spec | Deflection | 5 mV/Div to 10 V/Div in 1–2–5 sequence }} | |||
{{Spec | Input impedance | 1 MΩ || 20 pF }} | |||
{{Spec | Features | | |||
* ×10 switch to extend sensitivity to 0.5 mV/Div (at 10 MHz bandwidth) | * ×10 switch to extend sensitivity to 0.5 mV/Div (at 10 MHz bandwidth) | ||
* Invert switch | * Invert switch | ||
* Probe ×10/Identify sensing input | * Probe ×10/Identify sensing input | ||
}} | |||
{{EndSpecs}} | |||
==Links== | ==Links== | ||
* http://www.barrytech.com/tektronix/tek7000/tek7a15.html | * [http://www.barrytech.com/tektronix/tek7000/tek7a15.html 7A15 @ barrytech.com] | ||
* http://exodus.poly.edu/~kurt/manuals/uploads/TB_9-6625-2024-35.pdf | * [http://exodus.poly.edu/~kurt/manuals/uploads/TB_9-6625-2024-35.pdf Army Bulletin TB_9-6625-2024-35] (2002) | ||
==Pictures== | ==Pictures== | ||
Revision as of 02:25, 12 December 2015
The 7A15 is a single channel, 80 MHz general-purpose vertical amplifier for 7000-series scopes. The AM-6565/U (aka 7A15N11) is the military version of this amplifier. A Department of the Army Technical Bulletin (see links section) suggests that it was used with the 7603 and its military version (the AN/USM 281C).
The 7A15A is a fully discrete design (i.e. no integrated circuits), built mostly from BJTs, with a 151-1032-00 dual JFET as the front-end buffer.
Key Specifications
| Bandwidth | 0 – 80 MHz (DC), 1 Hz – 80 MHz (AC) |
|---|---|
| Deflection | 5 mV/Div to 10 V/Div in 1–2–5 sequence |
| Input impedance | 1 MΩ |
| Features |
|
Links
Pictures
-
7A15A
-
7A15A
